Construction Electricity

  • PSLO
  • Data Sheet
  • Program Review
  • Assessment Report

Program Student Learning Outcomes Assessment
(AY 2014-2015)

Program Student Learning Outcomes(PSLOS)

At the completion of Construction Electricity Program the student will be able to:

  1. Practice safety and occupational health procedures in the workplace.
  2. Use electricity hand and power tools competently.
  3. Test electrical equipment.
  4. Interpret schematic wiring diagrams and waveforms.
  5. Determine circuit load.
  6. Install residential wiring circuits according to given specification and plan.

PSLO Assessment Report Summary

What we looked at:

The Construction Electricity Certificate Program assessment from Fall 2014 to Spring 2015 which focused on PSLOs 5 and 6.

What we found:

PSLO #5: Determine circuit load
Task description: Using embedded questions on midterm and final exams, students’ knowledge on calculating series and parallel circuits, were assessed and students’ knowledge on calculating various electrical load such number of receptacle, number of lighting fixture and individual loads. VEM 104 and VEM 111

The results of the written and practical exams showed that 11 out of 15 students or 70% got a "C" or better in determining circuit load competently.

What we are planning to work on:

To provide more electrical appliances or materials for students to perform more hands-on exercises to determine the number of appliances to use in each circuit.

Incorporate On Job Training (OJT) for the construction electricity students to gain more skill in their field of study, and get familiar with the National Electrical Code (NEC) requirements.

Recommendations for students:

Recruit students with the basic knowledge of electricity. Students who are interested in electrical course should have a strong foundation in math and science. Replacing BU 097 to industrial immersion of students as their (OJT) On Job Training.

Program Data Sheet
Spring 2013

Download PDF Version of the Data Sheet

Enrollment by Major and Campus

Major:

Degree

Term

Chuuk

Kosrae

National

Pohnpei

Yap

Students

Construction Electricity

CA

Fall 2011

 

 

 

29

 

29

Construction Electricity

CA

Fall 2012

 

 

 

20

 

20

Construction Electricity

CA

Fall 2013

 

 

 

29

 

29

Construction Electricity

CA

Spring 2011

2

 

 

18

1

19

Construction Electricity

CA

Spring 2012

 

 

 

16

 

16

Construction Electricity

CA

Spring 2013

 

 

 

20

 

20

Construction Electricity

CA

Spring 2014

 

 

 

27

 

27



Credits by Major and Campus

Major:

Degree

Term

Chuuk

Kosrae

National

Pohnpei

Yap

Credits

Construction Electricity

CA

Fall 2011

 

 

 

307

 

307

Construction Electricity

CA

Fall 2012

 

 

 

199

 

199

Construction Electricity

CA

Fall 2013

 

 

 

336

 

336

Construction Electricity

CA

Spring 2011

 

 

 

212

9

221

Construction Electricity

CA

Spring 2012

 

 

 

177

 

177

Construction Electricity

CA

Spring 2013

 

 

 

192

 

192

Construction Electricity

CA

Spring 2014

 

112

 

68

242

422



Credits by Program and Campus

Program

Term

Chuuk

Kosrae

National

Pohnpei

Yap

Credits

Cabinet Making (CA)

Fall 2011

 

 

 

360

 

360

Cabinet Making (CA)

Fall 2012

 

 

 

228

 

228

Cabinet Making (CA)

Fall 2013

 

 

 

301

 

301

Cabinet Making (CA)

Spring 2011

 

51

 

369

 

420

Cabinet Making (CA)

Spring 2012

 

 

 

337.5

 

337.5

Cabinet Making (CA)

Spring 2013

 

60

3

195.5

 

294.5

Cabinet Making (CA)

Spring 2014

 

42

 

213

36

291



Credits Enrolled, Attempted and Earned(averages)

Major

Degree

Term

CredEnrollAvg

CredAttAvg

CredEarnAvg

TermGPAAvg

Construction Electricity

CA

Fall 2011

10.6

9.9

6.8

1.72

Construction Electricity

CA

Fall 2012

10.6

9.2

8.0

2.04

Construction Electricity

CA

Fall 2013

11.6

10.5

9.5

2.23

Construction Electricity

CA

Spring 2011

11.6

11.1

10.5

2.4

Construction Electricity

CA

Spring 2012

11.1

10.2

7.9

1.79

Construction Electricity

CA

Spring 2013

9.6

7.2

6.1

1.83

Construction Electricity

CA

Spring 2014

11.2

9.9

8.7

2.06



Program Sections, Enrollment Ratio and Average Class Size

Program

Term

Section

EnrollMax

Enrollment

EnrollRatio

AvgClassSize

Construction Electricity (CA)

Fall 2011

8

120

117

97.5%

14.6

Construction Electricity (CA)

Fall 2012

5

85

76

89.4%

15.2

Construction Electricity (CA)

Fall 2013

6

103

92

89.3%

15.3

Construction Electricity (CA)

Spring 2011

8

131

111

84.7%

13.9

Construction Electricity (CA)

Spring 2012

9

126

104

82.5%

11.6

Construction Electricity (CA)

Spring 2013

7

110

85

77.3%

12.1

Construction Electricity (CA)

Spring 2014

6

105

87

82.9%

14.5



Persistence and Retention (new full time students)

Major

Degree

New Students FT 2011_3

Students 2012_1

Students 2012_3

Persistence Spring 2012

Retention Fall 2012

Construction Electricity

CA

9

6

3

66.7%

33.3%

Major

Degree

New FT Fall 2012

Persisted Spring 2013

Retained Fall 2013

Persistence Spring 2013

Retention Fall 2013

Construction Electricity

CA

6

6

4

100.0%

66.7%



Course Completion & Withdrawals (Major)

Major

Degree

Term

Students

ABCorP%

ABCDorP%

W%

Construction Electricity

CA

Fall 2012

67

68.7

82.1%

6.0%

Construction Electricity

CA

Fall 2013

104

59.6%

68.3%

6.7%

Construction Electricity

CA

Fall 2013

120

75.0%

82.5%

8.3%

Construction Electricity

CA

Spring 2011

66

87.9%

93.9%

4.5%

Construction Electricity

CA

Spring 2012

50

62.0%

72.0%

8.0%

Construction Electricity

CA

Spring 2013

56

50.0%

60.0%

26.8%

Construction Electricity

CA

Spring 2014

88

70.5%

76.1%

11.4%



Course Completion & Withdrawals (Program)

Program

Term

Students

ABCorP%

ABCDorP%

W%

Construction Electricity (CA)

Fall 2011

120

77.5%

86.7%

0.8%

Construction Electricity (CA)

Fall 2012

79

81.0%

89.9%

3.8%

Construction Electricity (CA)

Fall 2013

101

83.2%

88.1%

7.9%

Construction Electricity (CA)

Spring 2011

120

75.0%

87.5%

7.5%

Construction Electricity (CA)

Spring 2012

110

76.4%

87.3%

5.5%

Construction Electricity (CA)

Spring 2013

90

81.1%

87.8%

5.6%

Construction Electricity (CA)

Spring 2014

87

78.2%

81.6%

5.7%



Graduates

Major

Degree

AY2010/11

AY2011/12

AY2012/13

Construction Electricity

CA

 

2

3



Graduates Rates

Major

Degree

Cohort

New Full

Graduation

Graduation

Graduation

Construction Electricity

CA

Fall 2008FT

19

0.0%

0.0%

0.0%

Construction Electricity

CA

Fall 2009FT

14

0.0%

0.0%

0.0%

Construction Electricity

CA

Fall 2010FT

8

25.0%

50.0%

  • Data based on SIS extracts December 2013 expect for graduates information.
  • Program" information is based on Dickerson's concept of a "program" as expending resources and is linked to courses owned by a program from TracDat
  • Graduation rates are based on Fall new students(full time) cohorts that are tracked at 100%, 150%, and 200%
  • Retention rates are based on Fall new students (full time) cohorts who return the following fall semester
  • Persistence rates are based on Fall new students (full time) cohorts who return the following spring semester

Program Review (Pohnpei Campus)

AP Full Official:Certificate of Achievement in Construction Electricity

Campus: Pohnpei Campus

Completed by: Romino Victor

AP Review Submission Date:March 2014

AR Review Cycle: 2012-2013

  1. Program Goals

    This program is designed to develop technical skills and practical experience to prepare the students for positions as electrician in this field. Students will be introduced to theory, installation and practices in troubleshooting residential and industrial circuits.

  2. Program History

    This program of Certificate in Construction Electricity was approved in 1998 giving the vocational division full authority to implement the said program. Then in 2003, the Applied Associate Degree in Building Technology major in Construction Electricity was approved giving students in the certificate level the opportunity to further their education in the electrical field.

    Milestone:

    • 1998 – Certificate of Achievement for Construction Electricity was approved for implementation.
    • 2000 – Initial course was offered with 3 full time students.
    • 2002 – Hired 1st local instructor to teach full time due to an increase number of students registering in the program.
    • 2005 – Full time instructor was hired to teach and assist in developing/updating courseware and program assessment.
    • 2007 – Electrical Shop was transferred to Auto-mechanic shop to provide students more space and suitable for learning skills environment.
      * Computer-Lab was constructed for Basic and Advance courses.
      * 14 computers provided for NIDA lessons.
    • 2008 – Currently working on course modifications to improve quality and course delivery based on recommendations from program/course assessment.
    • 2012- Hired as Acting Coordinator Apprenticeship Program to update trainees on progress report and budget for the program.
    • 2012 – On the approval of the campus director through division chair’s recommendation, the Simutech troubleshooting skills series software version 3.0 was updates to version 4.0 with its more advance features to be used on the VEM 111 Electrical wiring I.
    • 2013 – Program matrix on CSLO’s PLO’s and ILO’s were updated to align and meet the required competencies that the students should acquire upon their degree completion in the college.
    • 2014- Submit program review for 2 year cycle (2012-2013) to determine courses/ program improvements and alignment to present skills in demand or the competency required in the electrical program which was bench mark with neighboring community colleges.

    Since its full implementation of the program, students enrolled in these courses were trained and develop their theoretical, analytical and practical/hands-on skills. They’ve been involved in doing electrical maintenance work in school rooms and buildings of Pohnpei campus.

    Significant milestones / current activities:

    Since its implementation to date, students in the construction electricity program were involved in various activities such as repairs and maintenance services of electrical fixtures of the college (Pohnpei Campus – T&T Division) classrooms and workshops, provides installation services for FM station for students to do their practical exercises.

  3. Program Descriptions

    CERTIFICATE OF ACHIEVEMENT IN CONSTRUCTION ELECTRICITY.

    The construction electricity in major offers academic coursework, technical skills training and practical experience to prepare the students for positions as Electrician in this field. They are introduced to theory, installation and practical troubleshooting residential circuits.

  4. Program Admission Requirements

    High school graduate or GED certificate holder. Acceptance by the Admissions Board is based on the applicant’s score on the COMET and other criteria as defined by the Admissions Board.

    Program Requirements

    Certificate of Achievement in Construction Electricity
    Program Requirements:
            General Education Requirements:....................17 credits

                     BU 097 Intro to Entrepreneurship (3)
                    ESL 050 Technical English (3)
                    MS 104 Technical Math (4)
                    MS 106 Technical Math (4)
                    CA 95 Introduction to Computer (3)

            Technical Requirements:....................21 credits

                    VEM 102 Electrical Drawing and Sketching (1.5)
                    VEM 103 Basic Electricity I (4)
                    VEM 104 Basic Electricity II (5)
                    VEM 110 Workshop Fabrication/Hand and Power Tool Skills (3)
                    VEM 111 Electrical Wiring I (3)
                    VEM 112 Electrical Wiring II (3)
                    VSP 121 Industrial Safety Electrical/Electronic (1.5)

    Total Credit Requirements:....................38credits

  5. Program Certificate/Degree Requirements

    Certificate program course requirements are listed in the table below.

    Technical Requirements General Education Requirements
    VSP121 Industrial Safety ESL050 Technical English or SS100 World of Work
    VEM110 Workshop Fabrication MS104 Technical Math I
    VEM102 Electrical Drawing & Sketching MS 106 Technical Math II
    VEM103 Basic Electricity I CA095 Basic Computer Application
    VEM104 Basic Electricity II  
    VEM111 Electrical Wiring I  
    VEM111 Electrical Wiring II  

    Table 1: Construction electricity course requirement.
    Source: College of Micronesia General Catalog

  6. Program Courses and Enrollment

    Course Fall 12 Spring 12 Fall 13 Spring 13
    VSP 121 52(divided in two sections)   20  
    VEM 102 16   14 1
    VEM 103 15   16  
    VEM 104   11   14
    VEM 110 15   14 17
    VEM 111   29(divided in two sections) 14 14
    VEM 112   22(divided in two sections)   11

    Table 2: Construction electricity course enrollment
    Source: Data base on SIS extracts by IRPO- COMFSM website and teacher record book.

    Above table 1 shows program enrollment figures from Fall 2012- Spring 2013. In the some cases like 100’s courses, there are instances the classes are group in two section to meet classroom size, lab equipment availability and safety concerns.

  7. Program Faculty

    1. Romino Victor -Assistant Professor ( Teaching certificate program)
      AAS in Building Technology major in Electrical
      USDOL, Journeyman Certificate in Electrical
      COM-FSM, Federates States of Micronesia

    2. Cirilo B. Recana - Professor ( Teaching Advanced and AAS program)
      B.S. Industrial Education major in Electrical Technology MIST, Philippines
      Master of Arts (M.A.) in Teaching major in Electricity MIST, Philippines
  8. Program Indicators

    1. Assessment of course student learning outcomes of program courses

    See appendix A, generated report from Tracdat on unit course assessment of CSLOs. This report summarizes the course student learning outcomes (CSLOs) strategies target and task.



    2.Assessment of program student learning outcomes

    See appendix B, generated report from Tracdat on assessment impact by unit objectives on PSLOs. This report summarizes the program student learning outcomes (PSLOs), target and improvements on the findings.


    3.Program enrollment (historical enrollment patterns, student credits by major)

    Semester No.of Students Ave.Credit Enrolled Credits by Major Credits by Program
    FA 2012 20 9.2 199 228
    SP 2012 16 10.2 177 337.5
    FA 2013 29 10.5 366 301
    SP 2013 20 7.2 192 195.5

    Table 3: Construction electricity program enrollment and credits per semester.
    Source: Data base on SIS extracts by IRPO-COMFSM website.

    4.Average Class Size

    Major Term Section Enroll/Max Enrollment EnrollRatio AvgClassSize
    Construction Electricity Fall 2012 5 85 76 89.4% 15.2
    Construction Electricity Fall 2013 6 103 92 89.3% 15.3
    Construction Electricity Spring 2012 9 126 104 82.5% 11.6
    Construction Electricity Spring2013 7 110 85 77.3% 12.1

    Table 5 Average class size
    Source: Data base on SIS extracts by IRPO COMFSM website


    5.Course completion rate

    Course Completion & Withdrawals (Major)
    Major Degree Term Students ABCorP% ABCDorP% W%
    Construction Electricity CA Fall 2012 67 68.7% 82.1% 6.0%
    Construction Electricity/td> CA Fall 2013 104 59.6% 68.3% 6.7%
    Construction Electricity CA Fall 2013 120 75.0% 82.5% 8.3%
    Construction Electricity CA Spring 2012 50 62.0% 72.0% 8.0%
    Construction Electricity CA Spring 2013 56 50.0% 60.7% 26.8%

    Course Completion & Withdrawals (Program)
    Program Term Students ABCorP% ABCDorP% W%
    Construction Electricity Fall2012 79 81.0% 89.9% 3.8%
    Construction Electricity Fall2013 101 83.2% 88.1% 7.9%
    Construction Electricity) Fall2013 120 75.0% 87.5% 7.5%
    Construction Electricity Spring 2012 90 81.1% 87.8% 5.6%

    Table 5:Course completion and withdrawal (major & programs)
    Source: Data base on SIS extracts by IRPO-COMFSM website

    6. Student persistence rate (semester to semester)

    Table 6 Persistence
    Source: Data base by IRPO- COMFSM website
    Major Description Degree New Students FT 2011_3 Students 2012_1 Students 2012_3 Persistence Spring 2012 Retention Fall 2012
    Construction Electricity CA 9 6 3 66.7% 33.3%

    7. Student retention rate (Fall-to-Fall for two-year programs; Fall-to-Spring for one-year programs)

    Table 7 Retention rate from fall to fall for 2 years program
    Source: Data base by IRPO- COMFSM website
    Major Description Degree New FT Fall 2012 Persisted Fall 2013 Retained Fall 2013 Persistence Spring 2013 Retention Fall 2013
    Construction Electricity CA 6 6 4 100% 66.7%

    8. Success rates on licensing or certification exams (CTE, TP, Nursing, etc)

    Currently there is no licensing or certificate available for students of CE program in the FSM however; we’re looking for NCCER core certificate in Guam and SEPAI renewable energy affiliation for electrical practitioners in the South island nations.

    9. Graduation rate based on yearly number

    Graduates1
    Major Degree Year 2012 Year 2013
    Year 2012 CA 2 1

    Table 8. Construction electricity program graduation rate based on yearly number.
    Source: Data base on SIS extracts by IRPO-COMFSM web site.


    10.Students seat cost

    None

    11. Cost of duplicate or redundant courses, programs or services

    None

    12. Students' satisfaction rate

    Points: Always 5, Usually 4, Sometimes 3, Rarely 2, Never 1

    Fall 2012
    Classes # of Students Total Average
    VEM 102 16 4.7
    VEM 103 15 4.5
    VEM 110 16 4.9
    VSP 121 52 4.4
    Total 99 4.6


    Spring 2012
    Classes # of Students Total Average
    VEM 104 11 4.9
    VEM 111 29 4.2
    VEM 112 22 4.6
    Total 62 4.6


    Fall 2013
    Classes # of Students Total Average
    VEM 102 14 4.9
    VEM 103 16 4.1
    VEM 110 14 4.4
    VSP 121 20 4.6
    Total 64 4.5

    Spring 2013
    Classes # of Students Total Average
    VEM 102 1 5
    VEM 104 14 3.9
    VEM 110 17 4.7
    VEM 111 14 4.3
    VEM 112 11 4.8
    Total 57 4.5

    Table 9 : Summary of students’ satisfaction rate
    Source: T&T Division

    13. Alumni data

    N/A

    14. Employment data and employer feedback (employer survey)

    N/A

    15.Program added or cancelled at nearby regional institutions (PCC, GCC, Hawaii schools, UOG, CMI, NMC)

    College Certificate Credits
    COM- FSM (T&T) 38Credits
    HCC (EIMT) 45 Credits
    GCC (CT) 29-38 credits

    Table 10: Program added or cancelled at nearby regional institutions
    Source: COMFSM general catalog and website

    16. Transfer Rate

    Out of 87students that registered in this program from Fall 2012 to Spring 2013 an average of 17% were able to pursue/ continue to AAS degree after passing their COMET.

  9. Analysis and Recommendation

    Finding
    This section provides discussion of information discovered as a result of the evaluation such as problems or concerns with the program and what part of the program is working well and meeting expectation.

    The above program evaluation has resulted in the following findings:

    1. Table 1 shows the technical and general education requirements for certificate and degree students. This shows that gen ed. courses must meet pre-requisite courses before they can take their required courses which makes the students stays longer in their academic classes.
    2. Table 2 course enrollment rate shows decrease of freshmen enrolling in the certificate level. This could to lead to only few students’ pursuit to AAS degree program.
    3. Start making a survey through the office of IRPO in the community to track the employability of our graduates’ not only electrical programs but all programs of the division so we can check and balance the effectiveness of our programs.
    4. Student satisfaction rate for course instructor shows a high degree of satisfaction rate of the students taking the courses as identified in this program review.
    5. Every semester we encounter scarcity of financial resources and this can be found in the finding of each (CSLO)

    Recommendation:

    This section provides recommendations from the program on what to do to improve or enhance the quality of program and course learning outcomes as well as program goals and objectives. This section should also include suggestions that describe how the program might be able to create opportunities for a better program in the future. Some examples are exploring alternate delivery mechanisms, forming external partnerships, or realigning with other programs.

    1. General Academic courses required for vocational students like math, science and English can just directly taken as per required in their program. This will avoid prolonging the time spent by the students in repeating those classes and causing them to hold some classes in their technical and major courses.
    2. To accommodate increasing number of freshmen taking our courses, and focusing to the individual learning needs of the student, classes can be split into groups or section to create good environment for learning.
    3. Start making a survey through the office of IRPO in the community to track the employability of our graduates not only electrical programs but all programs of the division so we can check and balance the effectiveness of our programs.
    4. Modify/Revise some courses into SLO format to become more achievable.
    5. Modify/Revise course program and add courses that provides needed knowledge and skills required in their field such as;
      • Combining workshop fabrication and electrical wiring II course to make it into one (4 credit) course.
    6. Institutionalize budget for T&T division.

Unit Assessment Report

Report Period: 2013-2014

This website and all COM-FSM Internet based services are best viewed with Firefox 3.0 or better.
© Copyright 2020 College of Micronesia-FSM | Site Disclaimer
P. O. Box 159, Kolonia, Pohnpei, 96941 - (691) 320-2480
College of Micronesia-FSM is accredited by the Accrediting Commission for Community and Junior Colleges,
Western Association of Schools and Colleges, 428 J Street., Suite 400 Sacramento, CA 95814, (415) 506-0234,
an institutional accrediting body recognized by the Council for Higher Education Accreditation and the U.S. Department of Education.
Additional information about accreditation, including the filing of complaints against member institutions, can be found at: www.accjc.org